Reef Factory Thermo control Manual page 2

Apart from the Thermo control device itself, the package contains the following elements: a power
cord, a magnet that can be used to reset the device, an abbreviated manual and pins that can be
used to mount the device in any place you like. In order to set up the device correctly, follow the
steps below.
1. The picture below shows to see how to connect the peripherals to Thermo control correctly.
Notice the designations of power sockets for the cooling and heating systems. Be careful
not to confuse them while connecting.
2. Use the power cord included in the package to connect the device to a 230 V power socket.
After that, the device will turn on and the LCD display will show the current temperature
measured by the temperature sensor.
3. The device can be set up via a browser on a PC, laptop, tablet or smartphone. To do so,
you'll first need to view the list of Wi-Fi networks available on the given device. Then
connect to the network with a name corresponding to the serial number of your Thermo
control, in accordance with the following pattern: RFTCXXXXXXXXXXXX. Our device
is compatible with 2,4 GHz networks.
To log in, enter the following password:
reeffactory
4. Open an Internet browser on the same device and type the following address in the
"website address" field:
www.thermocontrol.io
Thermo control device manual 2/12