System Settings; Calibrating The Touch Screen - Universal Remote Control Medius TX-1000 Complete Control Owner's Manual

System Settings

You can set your Medius to display the Low Battery warning at a power
level between 0% and 20% (in 5% increments).
To activate the
battery low warn-
ing row, press the
WARN button.
The amount of
available memory
left to utilize is dis-
played in this row.
To SAVE any
changes you have
made, press
SAVE.

Calibrating the Touch Screen

If you find that your Medius is not responding to finger presses accurately,
you can calibrate the touch screen with this setting. It works like this:
1. Press the TOUCH button on the SETUP screen.
2. The screen changes and displays a small + symbol in the top left
corner.
3. Press the + symbol with the tip of your fingernail as accurately as
you can.
4. The + symbol now moves to the top right corner, then the bottom
left corner, the bottom right corner and finally the center of the
screen. Each time, press the + symbol as accurately as you can.
5. When the process is complete, the screen will return to the
SETUP screen.
Anytime you want, you can exit the Calibration screen by pressing the
WATCH button.
M O M
EDIUS WNERS
Page 11
ANUAL
The current battery
power remaining is
Once the WARN row
has been activated,
RIGHT arrow keys to
available battery level
10%, 15% or 20%).
To exit without sav-
ing any changes you
displayed here.
use the LEFT and
cycle through the
settings (0%, 5%,
have made, press
EXIT.