Light Settings; Sound Volume - Universal Remote Control Medius TX-1000 Complete Control Owner's Manual

Light Settings

You can adjust the backlighting of the remote in three additional ways:
1. You can turn on/off the LCD backlighting.
2. You can turn on/off the hard button backlighting.
3. You can select the amount of time the lighting stays on after the last button
press.
To activate LCD
backlighting, first
press this button.
To activate the hard
button backlighting,
first press this button.
To activate the
TIMER setting, first
press this button.
To SAVE any
changes you have
made, press
SAVE.
To exit without sav-
ing any changes
you have made,
press EXIT.

Sound Volume

Your Medius beeps whenever a button is pressed. However, you can adjust
the volume to any level you like by adjusting the volume control here.
To SAVE any
changes you have
made, press
SAVE.
M O M
EDIUS WNERS
Page 10
ANUAL
Once the LCD row is
whether the backlight-
pressing this button.
Once the BUTTON
the backlighting is
on or off by press-
Once the TIMER row
the backlighting will
stay on by using the
Adjust the volume of
the beep by using the
To exit without sav-
ing any changes
you have made,
press EXIT.
activated, change
ing is on or off by
row is activated,
change whether
ing this button.
is activated, change
the amount of time
LEFT and RIGHT
arrow keys.
LEFT and RIGHT
arrow keys.