Error Codes; Download From Driver Card - inelo TachoReader Combo Plus Manual

16
Menu in the 4Trans is different than shown here - refer to the 4Trans Help.
When under "Program settings" the option "Delete original files after download" is checked, then the
original files will be automatically deleted from TachoReader Mobile II after successful download.
It is easier and more efficient to work with the device when this option is activated.
It is also possible to pick only a specified data file from the TachoReader Mobile II. Click "Download
data files" and then select the desired file in the list.
3. TachoScan picks the data and performs the evaluation (the digital signature check as well). If
the digital signature is valid, the data is saved to the data base and the original file copied
into the PC. The download file data will be presented in the "Daily view" (see: "Help for
TachoScan").
Source files (original downloaded files) will be copied (moved) to the appropriate directory configured in
the program settings.
It is also possible to move the files from TachoReader into the PC (backup) without involving the
program TachoScan. For this purpose perform the common Windows
TachoReader is installed as a removable drive named "PNSTACHO").
Downloaded tachograph data file name format: "Vehicle reg. no_Date and time of the data download
(year, month, day, hour, minutes, seconds). DDD" (Example: SB_3106G_20130520091234.DDD).
Downloaded driver card data file name format: "Surname_First name_Middle name_Date and time of
the data download
Kowalski_Jan_Mateusz_20130520084432.DDD).
The memory of TachoReader Mobile II can contain up to about 2 000 original data files

11. Error codes

The errors of TachoReader Combo Plus are signaled by sound and flashing of the LEDs.
The red LED on the foreside of the device lights up for about 4 seconds. Within this period three
short acoustic signals can be heard. The LED goes out for about 2 seconds. This sequence
repeats. The fault code is displayed in the progress bar: this bar consists of 8 LEDs. Each LED
stands for one fault code. The LED close to the mark 0% depicts the fault code 1; the LED next to
the mark 100% stands for the fault code 8.
The meaning of the error codes depends on the data source:

11.1. Download from driver card

Possible errors when downloading from a driver card:
The whole line of the progress bar lights up smoothly four times just before reading the
card
ul. Karpacka 24/U2b, 43-300 Bielsko-Biała • REGON 356687662 • NIP:551-23-33-463
tel. + 48 33 496 58 71, fax. +48 33 496 58 71 (111) • e-mail: biuro@inelo.pl • www.inelo.pl
(year, month, day, hour,
INELO Stocerz Sp. J.
Transferring data files into PC
®
copying procedure (the
minutes, seconds). DDD" (Example: