Error Codes; Download From Driver Card - inelo TachoReader Combo Plus Tutorial

Error codes

11. Error codes
Errors during device operation are indicated by sound and flashing of the corresponding
Error Indication: Red
off for about 2 seconds. At the same time TR Combo Plus sounds three short beeps. The fault code
is displayed in the progress bar.
The meaning of the error codes depends on the data source:

11.1. Download from driver card

Possible errors when downloading from a driver card:
No response of the unit
No power.
Replace batteries / rechargeable batteries or connect the device to a tachograph or
computer.
The whole line of the progress bar lights up smoothly four times just before reading the card
ow battery, you can download the data.
L
Replace batteries / rechargeable batteries or connect the device to a tachograph or
computer.
Quick three blinks of the red LED in two-second intervals
The battery is low, reading of the driver card is not possible.
Replace batteries / rechargeable batteries or connect the device to a tachograph or
computer.
Insert the card correctly again. Check if it is the right card type.
Repead reading of the driver card.
ED located in the central point of the label is lit for about 4 seconds and is
L
False card type
False file structure of the driver card
EDs.
L
22