Foster XR415 Series Operation Instructions Manual page 3

English
Disposal Requirements
If not disposed of properly all refrigerators have components that can be harmful to the environment. All old
refrigerators must be disposed of by appropriately registered and licensed waste contractors, and in accordance
with national laws and regulations.
Start-Up and Test Sequence
After unpacking, clean and allow the cabinet to stand for 60 minutes before turning on (cleaning directions
supplied within this manual). Ensure the cabinet is situated on a firm, level surface, away from both hot and
cold air sources, as this will affect its performance.
Make sure that a minimum clearance of 50mm above and around the cabinet is available for ventilation and
effective operation.
Connect the unit to a suitable mains power outlet and turn the supply on. Please do not plug or unplug the unit
with wet hands. The cabinet will start automatically displaying the actual internal temperature of the unit (area
where product is stored).
As the operating temperature has been pre-set no adjustments are required. Allow the cabinet to reach its
normal operating temperature before loading with product.
Display Icons and Buttons
Icons
Thermostat Output Active
Alarm Warning
Fan Output Active
Defrost Output Active
2nd Parameter Set Active
Buttons
Info & Set Point
Manual Defrost & Decrease
Increase & Manual activation
Standby/Exit