Your Vacuum Cleaner; Operation - Beko VCC 6480 T User Manual

2

Your vacuum cleaner

2.1 Overview
16
15
14
13
17
12
10
11
1. Display and touch control panel
2. Cable winding button
3. On/Off button
4. Wheel
5. Hose cap
6. Suction nozzle
7. Upper cover
8. Button for opening the dust container
9. Carriage handle
10. Hose
11. Parquet/carpet brush adjustment latch
12. Parquet/carpet brush
13. Telescopic tube adjustment latch
14. Telescopic tube
15. Vacuum control
16. Handle
17. Turbo brush
The values which are declared in the markings affixed on your appliance or other printed documents supplied with it represent
the values which were obtained in the laboratories pursuant to the pertinent standards. These values may vary according to the
usage of the appliance and ambient conditions.
6 / 27 EN
Vacuum Cleaner / User manual
5 6 7
8
9
2.2 Technical data
Power : 800 W
Sound level : 70 dB(A)
Net weight : 5,1 kg
Supply voltage : 220-240 V~, 50-60 Hz
Dust volume : 3,5 L
Operating radius : 9 m
Energy class : A
Filter : HEPA13
Dust collecting on
carpet : C
Dust collecting on
hard surface : A
Dust emission : A
Technical and design modifications are reserved.
3

Operation

3.1 Intended use
The appliance was designed for household use
and is not suitable for industrial use.
3.2 Inserting/removing the
1
hose
1. Push the hose nozzle (10) in the arrow direction
into to the hose inlet (5).
2
3
4
• The fasteners on the hose nozzle (5) should
click into position.
2. Press the fasteners on the hose nozzle (10) in
order to remove the hose (5).
3.3 Inserting/removing the
telescopic tube
1. Insert the telescopic tube (14) into the end of
the handle (16).
2. Pull the telescopic tube (14) from the handle
(16) to remove it.
3. Push the height setting switch (14) in the arrow
direction and pull from its end in order to adjust
the length of the telescopic tube (13).
Vacuum Cleaner / User manual
3.4 Attaching/removing the
parquet/carpet brush
1. Attach the telescopic tube (14) to the parquet/
carpet brush (12).
2. Pull the telescopic tube (14) from the parquet/
carpet brush (12) to remove it.
3.5 Adjusting the parquet/
carpet brush
Shift the latch (11) on the parquet/carpet brush
(12) or;
• to " " position for hard floors and parquet.
• to " " position for carpets and rugs.
3.6 Operation
1. Pull the plug behind the appliance and plug it in
the socket.
2. Press the ON/OFF button (3) to start or stop the
appliance.
7 /27 EN