Beko VCC 6480 T User Manual page 5

3 Operation
3.6.1 Adjusting the suction
power
You can adjust the suction power using the + / -
keys of the touch control panel (1) found on the
vacuum cleaner.
1 2 3 4 5
1. Use your appliance at level to clean sofas.
2. Use your appliance at level to clean curtains
and table cloths.
3. Use your appliance at level to clean carpets.
4. Use your appliance at level to clean rugs.
5. Use your appliance at level to clean hard
surfaces.
3.6.2 Suction power adjustment
control
You can lower the suction power of the parquet/
carpet brush at a certain level by pulling backward
the suction power adjustment control (15) located
on the handle (16) without the need to use the
control panel (1) found on the product.
3.6.3 Dust indicator
When your dust bag is full, all icons on the display
and on the touch control panel (1) will start to
flash simultaneously. Replace the dust bag.
8 / 27 EN
Vacuum Cleaner / User manual
3.7 Accessories
Crevice tool
Suitable for cleaning "hard-to-
reach" areas including spaces bet-
ween chairs and furniture.
Upholstery tool
Suitable for floors, cleaning
stairways, automobiles, sofas and
chairs etc.
A
WARNING: Do not use it by
holding the outer end of the handle
(16).
3.8 Turbo brush
The turbo brush (17) allows you to clear the hair
on carpets in a faster and more efficient way.
Thus you can even remove the hair -which is hard
to remove such as dog hair or cat hair- easily.
On surfaces where you have difficulty moving the
turbo brush (17), push the slid found on the brush
in the arrow direction.
3 Operation
3.9 Warnings regarding the
energy label
This is a general-purpose vacuum cleaner. In
order to reach the highest energy efficiency and
cleaning performance class specified in carpet
and parquet cleaning, please use the regular
high-performance parquet/carpet brush (12).
The specified values regarding the energy label
were determined according to the predefined
measurement methods (in line with EN60312-1).
3.10 Turning off the vacuum
cleaner and parking
1. Turn off the device by pressing the ON/OFF
button (3) and plug it out.
2. Wind the power cable by pressing the power
cable winding button (2).
Vertical parking
Attach the hook of the parquet/carpet brush to
the parking slot under the appliance.
Horizontal parking
Attach the hook of the parquet/carpet brush to
the parking slot behind the appliance.
Vacuum Cleaner / User manual
9 /27 EN