John Lewis House Equate Single Cupboard Assembly Instructions Manual page 8

Step Nine
Lay the two front/back plinths (7) and the two left/right hand side plinths (8) out on your
protected working surface as shown. Insert four cam studs (A) into the allocated holes in the
front/back plinths (7), and tighten clockwise with a crosshead screwdriver. Do not overtighten.
Then insert two wooden dowels into the center top holes in the front/back plinths (7), and four
wooden dowels into the ends of the side plinths (8).
Step Ten
Connect the front/back plinths (7) to the side plinths (8) as shown.