Advertisement
Quick Links
John Lewis
House Equate Mirrored Cabinet
Stock number: 84982003
Thank you for purchasing this House Equate Mirrored Cabinet. Please read the instructions
carefully before use to ensure safe and satisfactory operation of this product
Pre-assembly preparation
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer
from whom you bought this product.
TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 60 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Please assemble on a soft clean surface to avoid damages to your product
Advertisement
Related Manuals for John Lewis House Equate Mirrored Cabinet 84982003
Summary of Contents for John Lewis House Equate Mirrored Cabinet 84982003
- Page 1 John Lewis House Equate Mirrored Cabinet Stock number: 84982003 Thank you for purchasing this House Equate Mirrored Cabinet. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product Pre-assembly preparation Necessary Tools Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet.
- Page 2 Fittings checklist Cam stud Hinge x 12 Screw for adjustable wall x 12 fixing Wood Dowel Adjustable Wall fixing Shelf support Cover caps Hinge screw 12 mm x 24 Metal plate for wall fixing...
-
Page 3: Parts Checklist
Parts checklist Top panel Back panel Side panel Right Door Left Side panel Left Door Right Fixed shelf Bottom panel Adjustable shelf Wall fixing - if in doubt seek professional advice Wood Brick or Masonry Cavity wall If fixing to wood make Use an appropriate wall Special toggle wall sure that it isn’t... - Page 4 Step by step assembly instructions Step One Prepare the side panels for assembly by inserting 6 cam studs (A) into the allocated holes in each side as shown. Gently tighten the cams clockwise with a crosshead screwdriver. NOTE: Make sure the cam studs are fixed in a straight angle, and do not overturn. Step Two Insert one wood dowel (C) into each end of the top (1), the bottom (9) and the fixed shelf (4).
- Page 5 Step Three Fix the top panel (1), the fixed shelf (4) and the bottom panel (9) to the side panel left as shown. Insert cams (B) into the allocated holes and gently lock the cams clockwise. Do not overturn. Step Four Gently slide the back panel (6) into the groves in the top, bottom and side panels.
- Page 6 Step Five Now connect the right hand side panel (2) to the top/bottom and shelf as shown. Insert and gently lock cams (B) by turning clockwise. Do not overturn. Step Six Place the two adjustable wall fixings (I) in the top corners of the cabinet, and fix them with the four fixing screws (H) supplied.
- Page 7 Step Seven Gently lay each door (7+8) down on your protected working surface as shown, and fix two hinges (G) on each door, using six hinge screws (E) on each hinge. The screws are tightened clockwise with a crosshead screwdriver. Step Eight Fix the two metal plates (F) to a sound wall as shown below.
- Page 8 Step Nine With two people gently place the cabinet on the two metal plates. Place a spirit level on top of the unit and make final level adjustment on the adjustable wall fixings from the inside of the unit. Adjust the top screw with a Philips head screwdriver clockwise or anticlockwise until the unit is in level, and finally adjust the bottom screws until the unit is flat against the wall.
-
Page 9: Door Adjustment
Door adjustment Please follow these simple steps for door adjustment: In or out adjustment: Loosen the rear hinge screw anticlockwise, and gently move the hinge in or out to the required position. Re-tighten the adjustment screw by turning clockwise. Sidewise adjustment: Turn the forward adjustment screw clockwise or anticlockwise for sidewise adjustment of the door. -
Page 10: Care And Maintenance
It must under no circumstances be used free-standing. No liability will be accepted for damage or injury caused by inadequate fixing or use without fixing. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com...