Assembly Instructions For Popcorn Cart - Winco POP-8B Operating Instructions Manual

Assembly Instructions - Popcorn Cart (optional)
MODEL: POP-8RC
CONTENTS
1 x Cart Body
1 x Working Platform
1. Attach cross bar to the long a square poles with the
longer screws.
2. Attach long and short square poles to the cart body
with the shorter screws.
3. Slide the axle shaft onto the short square poles.
4. Attach the wheels on each side of the axle.
Note: Check tire pressure before installing.
Tire pressure should be 350kpa/ 50psi.
5. Attach the working platform to the cart body (on the
same side as the wheels) and secure with the shorter
screws.
6. Attach the hand rail to the hand rail brackets with
longer screws.
7. Attach the assembled hand rail to the cart body with
the shorter screws.
8. With the cart assembled, the cart can now be stood
up right. Make sure everything is secure and leveled.
1 x Square Cross Bar
2 x Long Square Poles
2 x Short Square Poles
2 x Spoked Wheels
14 x Screws
2 x Hand Rail Brackets
[M10-32x5/16]
4 x Screws
[M4-0.7x10mm]
1 x Axle
2 x Jam Nuts
2 x Axel Washers
1 x Hand Rail
7