The Needle Broke While Sewing; The Sewing Result Does Not Look Great - ELNA Air Artist Faq

Machine
F A Q
8
Q10

The needle broke while sewing.

A10
Turn the power switch off and check the following. Turn the power switch off
and replace the needle as instructed in the instruction manual.
The blue tip needle (Part #813404013) that come with the embroidery machine
is recommended. You can also use Organ needle HA x 1 #11, HA x 1SP #11. Con-
tact the store from which the machine was purchased for more details.
Refer to Q15 to resume sewing.
Q11

The sewing result does not look great.

A11-1
For monogramming embroidery:
The font size should be 10 mm or larger. Monogramming embroidery smaller
than 10 mm will be distorted.
Set the monogramming embroidery size to 10mm or larger.
A11-2
For embroidery designs:
Do not enlarge the design size more than 120% or reduce the design size less
than 80%. This may distort the embroidery design.
Change the design size from 80% to 120% of its original size.
A11-3
Tips for better sewing results.