Scanning; Open Scan (Os) Mode - Uniden uh095sx Owner's Manual

UNIDEN Model uh095sx Dual Band (UHF CB/AM CB) Radio
Operation

Scanning

The uh095sx scanning feature allows you to search the SCAN MEMORY for active
channels on either AM or FM or both AM+FM
channels at the same time.
The scan memory has two main
groups; Open Scan (OS) and Group
Scan (GS). OS Scan searches all the
channels in its memory continuously.
GS Scan has the ability of monitoring
a priority channel every 1.5 seconds
while searching channels in its
memory.
Press to select which band you
AM/FM
wish to scan.
Press and Scanning starts.
The SCAN icon flashes.
The scan direction can be changed at any time by pressing
To skip the active channel, press
To deactivate SCAN, press
If SCAN is deactivated while Scanning has stopped on an active channel, the
uh095sx will stay on that active channel.
If no channels are active, the uh095sx will reinstate the starting channel.
If the PTT button is pressed during scanning the uh095sx will return temporarily to
the starting scan channel and transmit. Scanning will automatically resume after 20
seconds of inactivity.
If the PTT button is pressed while scanning has stopped on an active channel the
uh095sx will transmit on that same channel. Scanning will automatically resume
after 20 seconds of inactivity.
Programming Scan Channels see p11.

Open Scan (OS) Mode

Allows continuous scanning of all
selected channels. If an active channel
is found, scanning will stop on that
channel.
If the received signal ceases, the unit
will wait 3 seconds for the signal to
return, otherwise scanning resumes.
OS Mode is indicated by the absence of the GS icon.
or momentarily. Scanning resumes.
or the INST button on the microphone.
10
or .