Programming A Channel Into Memory; Deleting A Channel From Memory; Scanning - Uniden Voyager Owner's Manual

•
While in Triple Watch mode, you can change the currently selected
channel using the
•
A momentary press of the 16/9 button interrupts Triple Watch mode
and remains on 16, or on channel 9 if you press once more. To
return to the previous mode, simply press the button again.
•
It becomes Dual Watch when Triple Watch function is turned on
while CH9 or CH16 is displayed.

Programming a Channel into Memory

Before using the scanning feature, you have to program channels
into memory.
Select the channel to enter into memory

by pressing the
Press the MEM button to store the

channel.
MEM appears on the display.

Deleting a Channel from Memory

Select the channel to delete from

memory by pressing the
button.
Press the MEM button.

MEM disappears from the display.

Scanning

To begin scanning the programmed

channels, press the SCAN button.
SCAN and TRIPLE appear on the
display.
Operation
or button.
or button.
or