Color profile: Disabled Composite Default screen CONTROL & INDICATORS INCLUDED IN YOUR PACKAGE: Please check which model you have - UH041 or UH041P . UH041 UH041 Radio Operating Guide Belt Clip SCAN hi/lo channel/ volume scan 1 Antenna 2 PTT (Push-To-Talk) Button 3 Channel/scan up Key 4 Channel/scan down Key 5 Duplex/Transmit Hi/Lo...
Color profile: Disabled Composite Default screen GETTING STARTED Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. BATTERY INSTALLATION Your UH041/UHO41P NiMH battery pack (UH041P includes NiMH battery pack) batteries for power.
Color profile: Disabled Composite Default screen channel/ volume scan charge 1 charge 2 Place the UH041P into the charge cradle. The charge light will come on to indicate the unit is charging. Before operating the UH041P , charge the battery pack for 16 hours. Do not charge alkaline or non rechargeable batteries.
Color profile: Disabled Composite Default screen OPERATION POWER ON/OFF Press and hold to turn the Radio on. A channel number will appear on the display. Press and hold to turn the Radio off. VOLUME Press volume decrease the volume level. icon appears on display while volume 'VOL' is being adjusted.
Default screen SELECTING CHANNEL Press channel desired channel. TO TRANSMIT AND RECEIVE UH041/UHO41P reference a list of the available channels and corresponding frequencies is printed on page 10. 1. Before you transmit, listen for activity on the selected channel. 2. When the channel is clear, press and hold the to transmit.
Page 7
Transmit Hi. 'HI' icon will appear on display. Press and hold return to Transmit Lo setting. 'HI' icon will disappear from display. The RF transmit power of the UH041/UHO41P Power 0.3/1.0 W. AUTOMATIC SQUELCH FEATURE UH041/UHO41P system which shuts off weak transmissions and unwanted noise.
Press momentarily. The appears. Press again to deactivate the duplex operation. UH041/UHO41P normal operation. Note: If is pressed when the channel is not from CH01 - CH08, an error tone sounds. SCANNING The scan function scans all channels and stops at an active channel.
Color profile: Disabled Composite Default screen REPLY DELAY While scanning, the UH041/UHO41P and receives a transmission. When the received signal is over, the unit will wait for 2 seconds for the return of the signal, otherwise, the radio resumes scanning. POWER SAVE...
Press to confirm the selected setting. To exit Keylock on mode, press and hold off and then turn on again. Note: While in Keylock on mode, the UH041/UH041P will still receive transmissions. UH041 Manual.prn UH041 Manual - UT01912AZ Monday, October 13, 2003 6:52:29 PM...
Color profile: Disabled Composite Default screen UHF CHANNELS & FREQUENCIES Simplex Mode CH No. Transmit / Receive Frequency (MHz) 476.425 476.450 476.475 476.500 476.525 476.550 476.575 476.600 476.625 476.650 476.675 476.700 476.725 476.750 476.775 476.800 476.825 476.850 476.875 476.900 NOTE: Channel 05 and 35 are Emergency Channels and channel 11 is a Calling Channel. Channels 22 and 23 are used for telemetry and telecommand applications, voice communications are not permitted on these channels.
Uniden, (C) Improperly installed, (D) Repaired by someone other than an authorised Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as part of a system not...