VOYAGER.QX 11/19/2 2:19 PM Page 19
Deleting a Channel from Memory
1
Select the channel to delete from
memory by pressing the L or M button.
2
Press the MEM/FIPS button.
MEM disappears from the display.
Scanning
1
To begin scanning the programmed
channels, press the SCAN button. SCAN
and TRIPLE appear on the display.
2
To stop scanning, press the SCAN
button once more. SCAN and TRIPLE
disappear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 3 second
delay period.
• When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press and hold the 16/9/TRI button for
2 seconds.
TRIPLE disappears from the display.
19