Spinning® Studio Console
About
®
The Spinning
Studio Console is used on the Precor Spinner
®
Spinner
Rally™, and Spinner
Refer to the SPINNING
use, and service information.
Operator's Guide
l
Features
Battery Powered Console and Cadence Sensor: The console is powered by 3 -
l
AAA batteries and the Cadence sensor uses a CR2032 lithium coin cell battery.
1
ANT+
connectivity: The console supports ANT+ wireless heart rate monitor chest
l
straps (however the Polar or Suunto ANT+ brand heart rate monitor chest straps are
not supported).
Program Memory: The console maintains programming code during battery replace-
l
ment.
1
ANT+ (pronounced ant plus) is a wireless protocol for monitoring sensor data such as a per-
son's heart rate or a bicycle's tire pressure
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
®
Climb™ indoor cycles.
®
STUDIO Owner's Manual for the latest console installation,
7 Spinning® Studio Console
®
®
Ride™, Spinner
Shift™,
About
Page 63