Replacing Belt And/Or Agitator; Replacing Exhaust Filter - LG V-UP255NB Owner's Manual

REPLACEMENT INSTRUCTIONS
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so
could result in electrical shock or personal injury from cleaner suddenly starting.

Replacing Belt and/or Agitator

Check the belt and agitator frequently. If they are
broken or worn out, replace them.
Turn the unit over and remove the bottom plate as
described in Removing/Installing the Bottom Plate
section.
To remove the belt or agitator, grasp the both
ends of agitator and lift it slowly. Remove the belt
from agitator pulley and motor shaft. If the belt
was broken, be sure all pieces are removed.
WARNING
Personal Injury Hazard
Be careful when removing the agitator as
the belt tension is high.
Failure to do so could result in personal
injury from the agitator releasing quickly
and snapping away.
The motor shaft may be very hot!
Loop the new belt around the motor shaft and
agitator pulley.
Reinsert the agitator making sure that both ends
of the agitator fit in the groove of the nozzle head.
After installing the agitator, turn it by hand making
sure that the belt is not twisted or pinched and all
parts turn freely.
Replace the bottom plate as described in the
Removing/Installing the Bottom Plate section.

Replacing Exhaust Filter

This exhaust filter must be replaced when dirty.
Pull outward on the dust cover grip to remove
dust cover. (Fig. A)
Replace exhaust filter and close the dust cover.
(Fig. B)
Agitator
Agitator
A
A
B
B
Exhaust Filter
15
Motor Shaft
Motor Shaft
Belt