Page 1
Model V-UP142NJP English/Hebrew Language Page Material 100g Date 2005.07.27 Part No. 3828FI5872D Chage Record Change content drawing actualization Color(cover/body) Size(W*H) 145x215 Designer Description Designer Confirm Date ECO No. 05I0V05447 05.07.27 Yang zhihua owners manual zhihua Mu.H.J...
Page 2
Upright Vacuum Cleaner Owner’s Manual MODEL: V-UP142NJP PLEASE READ THIS MANUAL THOROUGHLY AND CAREFULLY BEFORE OPERATING THE VACUUM CLEANER P/No.: 3828FI5872D...
TABLE OF CONTENTS IMPORTANT SAFEGUARDS ...3 ASSEMBLING THE VACUUM CLEANER ...5 - STEP 1: UNPACKING THE UNIT ...5 - STEP 2: ASSEMBLING THE HANDLE...6 - STEP 3: CORD STORAGE...6 - STEP 4: ATTACHING THE TOOLS...6 CLEANER DESCRIPTION ...8 SPECIAL FEATURES ...9 MOTOR PROTECTOR ...9 OPERATION...10 - Important Safety Tips ...10...
IMPORTANT SAFEGUARDS WARNING Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons, or damage when using your vacuum cleaner, please follow these basic safety precautions. 1. Disconnect power supply before cleaning the unit. 2.
Page 5
IMPORTANT SAFEGUARDS Important information for users in the UK: The wires in the mains lead of this appliance are coloured in accordance with the following code: BLUE - neutral BROWN - live The colours of the wires in the mains lead of this appliance may not correspond with the coloured makings identifying the terminals in your plug.
ASSEMBLING THE CLEANER WARNING Electrical Shock Hazard Do not plug into the electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury. STEP 1: UNPACKING THE CARTON Remove all parts from the carton and use the figure below to identify each part. Make sure that you have removed all parts before disposing of the carton and packing materials.
ASSEMBLING THE CLEANER STEP 2: ASSEMBLING THE HANDLE Slide the handle into the opening at the back of the vacuum cleaner body. (Fig. A) Insert the screw into the handle screw hole and tighten with a screwdriver. (Fig. B) STEP 3: CORD STORAGE Quick Release Make sure that the quick-release cord...
ASSEMBLING THE CLEANER WARNING Electrical Shock Hazard Do not plug into the electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury. STEP 4: ATTACHING THE TOOLS Store the crevice tool and dusting brush in the clip at the bottom of the handle.
SPECIAL FEATURES EDGE CLEANING FEATURE The edge cleaning feature provides improved cleaning of carpets along walls and furniture. MOTOR PROTECTOR This vacuum has a motor protector by-pass valve which automatically opens to provide cooling air to the motor when a clog prevents the normal flow of air.
WARNING Personal Injury and Product Damage Hazard • DO NOT use outlets above work surfaces. Damage to items in the surrounding area could occur. IMPORTANT SAFETY TIPS Before you plug in your vacuum cleaner, make sure that the voltage indicated on the rating label of the vacuum cleaner matches that of your local electrical supply.
WARNING Personal Injury and Product Damage Hazard • DO NOT use outlets above work surfaces. Damage to items in the surrounding area could occur. TRANSPORTING THE VACUUM CLEANER To move your vacuum cleaner from room to room, place the handle in the upright position, tilt the vacuum back on its rear wheels and push it forward.
WARNING Personal Injury and Product Damage Hazard • DO NOT use outlets above work surfaces. Damage to items in the surrounding area could occur. USING ATTACHMENTS Remove the lower end of the flexible hose from the vacuum cleaner by pull the hose collar out of the clip on the base.
REMOVING CLOGS WARNING Electrical Shock and Personal Injury Hazard • Unplug the vacuum cleaner before cleaning the unit. Failure to do so could result in electrical shock or personal injury from the vacuum cleaner starting unexpectedly. If your vacuum cleaner makes a strange noise or suction decreases, check for blockages or whether the pre-motor filter is dirty.
REMOVING CLOGS WARNING Electrical Shock and Personal Injury Hazard • Unplug the vacuum cleaner before cleaning the unit. Failure to do so could result in electrical shock or personal injury from the vacuum cleaner starting unexpectedly. PRE-MOTOR FILTER Check and clean the pre-motor filter regularly.
REPLACEMENT INSTRUCTIONS WARNING Electrical Shock and Personal Injury Hazard • Unplug the vacuum cleaner before cleaning the unit. Failure to do so could result in electrical shock or personal injury from the vacuum cleaner starting unexpectedly. EXHAUST FILTER The exhaust filter is washable HEPA filter. (Optional: Non washable HEPA filter) The exhaust filter must be rinsed when it becomes dirty.
REPLACEMENT INSTRUCTIONS WARNING Electrical Shock and Personal Injury Hazard • Unplug the vacuum cleaner before cleaning the unit. Failure to do so could result in electrical shock or personal injury from the vacuum cleaner starting unexpectedly. REPLACING THE BELT AND/OR AGITATOR Check the belt and agitator regularity.
IEC-1200W, MAX-1400W approx 334 x 1096 x 347mm approx 334 x 1096 x 347mm approx 334 x 1096 x 347mm approx 334 x 1096 x 347mm PARTS PARTS PARTS PARTS V-UP142NJP V-UP142NJP V-UP142NJP V-UP142NJP 230V/50Hz 230V/50Hz 230V/50Hz 230V/50Hz 7.7m 7.7m 7.7m...
BEFORE REQUESTING SERVICE Review the chart below for possible solutions in the event of a minor problem. Any service needed, beyond the procedures described below and elsewhere in this manual, should be performed by an authorised service centre. WARNING Electrical Shock and Personal Injury Hazard •...