Replacing Belt - LG V-UP851NB Owner's Manual

3-11
Twist the filter cartridge counter-
clockwise, aligning arrows on lid and
cartridge. Remove pleated filter from
inside cartridge.
Belt replacement
The belt on your vacuum cleaner
causes the agitator to rotate and is
important for the effective operation of
the cleaner. The belt is located under
the bottom plate of the cleaner and
should be checked from time to time to
be sure it is in good condition.
When to replace
Disconnect cleaner from electrical
outlet.
To check belt, remove bottm plate as
shown in Fig. 3-14. Replace belt if it is
stretched, cut or broken.
8
3-12
Tap filter against side of trash container
to remove dirt or brush with the
cleaner's combination tool.
Return pleated filter to inside the filter
cartridge.
3-14
How to replace
Disconnect cleaner from electrical
outlet.
Removing bottom plate.
Place handle in lowest position and
turn cleaner over so bottom side is up.
Remove the 5 screws as shown with a
Phillips screwdriver. Lift off bottom
plate (A).
3-13
Replace the filter assembly in the dirt
cup lid, aligning arrows and twisting
clockwise to lock into position.
Replace dirt cup lid onto dirt cup by
aligning arrows on lid and dirt cup and
twisting clockwise.
Replace dirt cup as described in
Fig.3-5.
3-15
C
A
Removing belt
Remove agitator brush roll (B) and
used belt (C).
Discard used belt.
B