Operation Method - Shinco SPF2-10C User Manual

OPERATION METHOD

Cooling mode
When the A/C enters cooling mode automatically or cooling mode is selected after

power ON, the cooling indicator lamp lights up.
Press Up/Down key to adjust setting temperature (16℃~

Press Speed key to choose High/Mid/Low speed.

Fan mode
When pressing mode key or choosing Fan mode by pressing the remote controller,

the wind indicator lamp lights up.
Press Speed key to choose High/Mid/Low speed.

Temperature can't be set.

Dehumidification mode
When pressing mode key or choosing dehumidification

mode by pressing
dehumidification indicator lamp lights up.
Remove the dehumidification water wedge, insert water

manifold, place the other end of the water manifold into
the water vessel or drainage passage, as shown in the
right figure.
In dehumidification mode, the fan is defaulted to run at

low speed, and wind speed can't be adjusted.
Temperature can't be set.

the remote controller,
7
30℃) (61℉ 86℉) ~ .
the