Common Failures And Diagnosis; Intelligent Error Detection - Shinco SPF2-10C User Manual

Take out the air inlet grille and pull out the filter screen at both sides according to the

direction shown in the following figures. Use vacum to remove lint from filters.
Put the filter screen into the warm water (about 104℉) added with neutral detergent,

dry it at a shady place after cleaning.
SEASONAL CLEANING
If the A/C will not be used for a long time:
Pull out the water plug to drain.

Run the A/C in fan mode for 2H till the inside is dry.

Turn off the A/C and unplug.

Wash the filter screen and reassemble it.

Dismantle the exhaust duct and keep it properly.

Cover the A/C with a plastic bag and place it at a dry place.

If possible store unit in its original box.


COMMON FAILURES AND DIAGNOSIS

INTELLIGENT ERROR DETECTION

9