Heat Sink Assembly - HP ProBook 650 G5 Maintenance And Service Manual

Heat sink assembly

Table 6-7 Heat sink assembly descriptions and part numbers
Description
Heat sink assembly for use in models with discrete graphics
Heat sink assembly for use in models with integrated UMA graphics
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly
2. Remove the following components:
a. Bottom cover (see
b. Battery (see
c. Optical drive (see
d. Hard drive (see
e. Solid-state drive or Optane memory module (see
f. WWAN module and bracket (see
g. Keyboard (see
h. Internal frame (see
To remove the heat sink assembly for products with integrated UMA graphics:
1. In the order indicated on the heat sink assembly, loosen the four captive Phillips screws that secure the
assembly to the computer (1).
54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 36)
Optical drive on page
Hard drive on page 40)
WWAN module on page
Keyboard on page 47)
Internal frame on page
35)
39)
Solid-state drive on page
43)
51)
Spare part number
L58716-001
L58717-001
34).
42)