RTC battery
Table 6-12
RTC battery description and part number
Description
RTC battery
Before removing the RTC battery, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the following components:
a.
Bottom cover (see
b.
Battery (see
c.
Optical drive (see
d.
Hard drive (see
e.
Solid-state drive or Optane memory module (see
f.
WWAN module and bracket (see
g.
Keyboard (see
h.
Internal frame (see
To remove the RTC battery:
Disconnect the RTC battery cable from the system board (1), and then lift to release the RTC battery
▲
from the system board (2).
Reverse this procedure to install the RTC battery.
(Preparation for disassembly on page
Bottom cover on page
Battery on page
36)
Optical drive on page
Hard drive on page
40)
WWAN module on page
Keyboard on page
47)
Internal frame on page
35)
39)
Solid-state drive on page
43)
51)
Component replacement procedures
Spare part number
L23943-001
34).
42)
65