Fingerprint Reader Assembly - HP ProBook 650 G5 Maintenance And Service Manual

Fingerprint reader assembly

Table 6-17 Fingerprint reader assembly descriptions and part numbers
Description
Fingerprint reader assembly (includes cable and gasket)
Fingerprint reader bracket (included in Bracket Kit)
Before removing the fingerprint reader assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the following components:
a. Bottom cover (see
b. Battery (see
c. Optical drive (see
d. Hard drive (see
e. Solid-state drive or Optane memory module (see
f. WWAN module and bracket (see
g. Keyboard (see
h. Internal frame (see
i. Serial port board or VGA port board (see
j. System board (see
Remove the fingerprint reader assembly:
1. Remove the Phillips M2.0 × 2.0 screw (1) from the fingerprint reader bracket.
2. Slide the bracket, and then lift the bracket off the fingerprint reader board (2).
74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 36)
Optical drive on page
Hard drive on page 40)
WWAN module on page
Keyboard on page 47)
Internal frame on page
System board on page
35)
39)
Solid-state drive on page
43)
51)
Serial port board or VGA port board on page
69)
Spare part number
L58718-001
L59054-001
34).
42)
66).