Page 1
The Tauri temperature-check tablets should only be used to detect variations in surface temperature. In the event that an elevated skin temperature is detected, the subject should be advised to check temperature with an approved medical thermometer and the finding confirmed.
Page 2
Content Power connection ---------------------------------------------------------------- 2 Software set up ------------------------------------------------------------------- 3 - 9 Installation (Wall Mount) ------------------------------------------------------- 10 - 11 Installation (Table Stand FIX027) ---------------------------------------------- 12 Installation (Table Stand FIX028) ---------------------------------------------- 13 Installation (Rotatable Table Stand FIX030) --------------------------------- 14 Glory Star Support ----------------------------------------------------------------- 15...
Page 3
1. Power Connection Connect power-in to the external female power cable of TAURI.
Page 4
2. Software Setup 2.1 Press the “setting” icon on the top left corner and enter password “0000“. 2.2 Adjust the volume, change the password and check firmware update in the settings. Press “Save and back” at the bottom left after you have finished your settings.
Page 5
2.3 Connect to the internet in order to check and download the latest version. 2.4 To get connected to WIFI, press the bottom right corner 4 times enter” 0000” to exit TAURI.
Page 6
2.5 Click the icon on the top left corner to enter password. 2.6 Enter password “0000” to unlock the screen.
Page 7
2.7 Choose Settings. 2.8 Enter log in name “ admin “ and password “ 0000 “.
Page 9
2.11 Connect WIFI and Click “back” button two times to go back to StarOS. 2.12 Select “Launch Now” to apply settings and return to TAURI.
Page 10
2.13 Check the version after connected to the internet successfully.
Page 11
3. Installation 3.1 Wall Mount(All sizes) Install the wall mount to the back of the device and put screws on the 4 holes of the mount aligning to the TAURI’s back mount holes.
Page 12
Install the second part of the wall mount to the wall. Slide TAURI with the wall mount on to the mount on wall using the hinges at the side of the wall mount.
Page 13
3.2 Table Stand FIX 027 (10” to 21.5”TARUI) Aline the 4 screws holes at the back of TAURI to FIX-027 Table Stand screw positions, and place screws to fixate it.
Page 14
3.3 Table Stand FIX 028 (15” to 21” TAURI) Aline the 4 screws holes at the back of TAURI to FIX-028 Table Stand screw positions, and place screws to fixate it.
Page 15
3.4 Table Stand FIX030(All Sizes) Aline the 4 screws holes at the back of TAURI to FIX-030 Table Stand screw positions, and place screws to fixate it.
Need help?
Do you have a question about the TAURI and is the answer not in the manual?
Questions and answers