Advertisement
Available languages
Available languages
LED Shadow™ QRG
AC Power
Power Linking
Fuse
Replacement
Mounting
Mounting
Diagram
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
For the maximum number of LED Shadow™ products that you can power
link at each voltage, see the User Manual or the sticker on the product.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
the mounting clamp is capable of supporting the weight of the
product.
For
our
www.chauvetlighting.com/cables-clamps-main.html.
mounting brackets with keyhole mounting holes for flush wall mounting.
Safety Cable
(such as CH-05
from Chauvet)
Flush Mounting
to Wall (Drywall
Screws x 4)
Chauvet
line
of
Flush Mounting
Bracket
4
Safety
Notes. Make sure
mounting
clamps,
There are also two
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Bracket Adjustment Knob
Mounting Bracket
EN
go
to
Advertisement
