Camera; Taking A Quick Photo; After You've Taken Your Photo; Using Your Toolbar Options - LG KM710c User Manual

Camera

Taking a quick photo

Press and hold down the
1
right hand side of the handset and the
camera's viewfi nder will appear on screen.
Holding the phone horizontally, point the
2
lens towards the subject of the photo.
Press or the key on the right side
3
of the handset to take a photo.

After you've taken your photo

Your captured photo will appear on screen.
The name of the image runs along the bottom
of the screen.
Select a sub menu of right side where you
can choose to shoot a New image, set your
image as Wallpaper or Picture ID, look at
the other photos in your Album, or send the
photo as a Multimedia message, Bluetooth or
Email. To exit the Camera, press and hold C.

Using your toolbar options

Selecting Options will display a new toolbar
across the bottom of the viewfi nder screen.
Use and to navigate through the toolbar
options.
Resolution – See Changing the image size
on page 31.
Quality - Choose between Normal, Fine and
Super fi ne. The fi ner the quality the sharper
key on the
a photo will be but the fi le size will increase
as a result. You'll be able to store fewer larger
photo fi les in your memory.
Those options will appear on the right side of
the screen, before you take your picture:
Shutter tone - Select one of the three
shutter sounds or switch the sound off.
Reset settings – Choose Yes to reset your
phone to its original camera settings.
In the viewfi nder screen of landscape mode,
pressing
sub-menus for more detail camera setting.
Self timer - The delay-timer allows you
to set a delay after the capture button
is pressed. Choose from 3 seconds, 5
seconds or 10 seconds. Great for that
group photo you want to be part of.
Continuous shot - This enables you to take
up to six shots automatically in very quick
succession. Great for taking photos of moving
objects or at sporting events.
White balance - The white balance ensures
that any white in your photo is realistic. In
order for your camera to correctly adjust the
white balance you may need to determine the
light conditions. Choose from Auto, Daylight,
Incandescent, Cloudy, Night mode or
Fluorescent.
or will show you the below
01
02
03
04
05
06
07
08
29