Theben SELEKTA 170 top3 Manual page 13

Setting holiday function
MENU
u
CHANNEL C1
MANUAL
PERM ON
PERM OFF
OVERR ON
HOLIDAY
Press MENU
†
¾
Select MANUAL and press OK to confirm
† ¾
Select CHANNEL and press OK to confirm
† ¾
Select HOLIDAY and press OK to confirm
† ¾
Select ON and press OK to confirm
†
¾
Select START HOLIDAY and press OK to confirm
†
¾
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm
† ¾
Select END HOLIDAY and press OK to confirm
† ¾
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm
† ¾
Activate PIN-Code
The PIN code is set in OPTIONS via the menu.
L If you have lost the PIN, please call the Theben Hotline.
L Have the serial number ready!
MENU
OPTIONS
u
OPERATING
HOUR
EXT INPUT
LANGAGE
PIN
NO PIN
u
FACTORY
WITH PIN
SETTINGS
INFO
Setting manual or permanent switching
Manual and permanent switching can be set using the menu
in MANUAL or (in the automatic screen) by key combination
(see fig).
•
Manual control
Reversing the channel status to the next automatic or
programmed switching.
ON
u
BEGIN HOLIDAY
END HOLIDAY
CURRENT PIN
u
NEW PIN
00:00
u
•
Permanent switching
As long as a permanent switching (on or off) is activated,
the programmed switching times are ineffective.
C1 C2
Activate manual switching
Briefly press both keys simultaneously
† ¾
Activate permanent switching
Simultaneously press both keys for 2 seconds
† ¾
Cancelling manual/permanent switching
Press both keys simultaneously
†
¾
Operating hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
† ¾
to 10,000 h)
Using Bluetooth OBELISK top3
All functions can also be transferred to the time switch using
the Bluetooth OBELISK top3 memory card (9070130).
Copy OBELISK → Time switch
Copies all switching programs and settings from the time
switch to the memory card. Starting OBELISK program
Copy Time switch → OBELISK
Copies all switching programs and settings from the time
switch to the memory card.
Start OBELISK program
Takes on the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the time switch are re-activated.
ok
5