Configuration Procedure - 3Com -1623 Getting Started

12 C
ONFIGURING
Configuration Procedure
This section provides step by step instructions for
configuring the set up shown in Figure 5.
Figure 5 Office A Configuration
Network management system
In these instructions, your site is Office A.
To configure your OfficeConnect NETBuilder 10
bridge/router, follow the steps in the following sections:
Y O C
OUR FFICE ONNECT
IP 10.1.0.0
OfficeConnect
bridge/router
ISDN
ISP
Internet
IP 20.1.0.0
Network management system
Configuring ISDN Lines:
If you are located in North America, use the
procedure in "Configuring ISDN (In North America)"
on page 13.
If you are located outside North America, use the
procedure in "Configuring ISDN (Outside North
America)" on page 16.
NETB 10 B
UILDER
Office A
IPX = AAA
Leased line
IPX = CCC
IP = unnumbered
ISDN
/R
RIDGE OUTER
OfficeConnect
bridge/router
Office B
IPX = BBB