Table of Contents
Advertisement
24
C
ONFIGURING
f In the CONTrol field, choose ROute.
g Click Apply.
Configuring PPP Authentication
To configure PPP authentication, you will need to
communicate with your partner office (Office B) and
exchange user names and passwords.
Offices A and B must be configured before remote
connectivity can be established.
For remote access security at Office A, assign passwords
and usernames to your OfficeConnect NETBuilder 10
bridge/router network.
Office A Configuration
For remote access security at Office A, assign passwords
and usernames to your OfficeConnect NETBuilder 10
bridge/router network.
To configure PPP authentication for Office A, follow these
steps:
1 Return to the Web Link home page by clicking Web Link in
the banner.
2 In the navigation frame, click the Configuration link.
3 In the navigation frame, click the IP Routing link.
4 In the Dial on Demand Dynamic Dial section of the
navigation frame, click the PPP AuthLocalUser link.
a In the start field, choose 4.
b In the AuthLocalUser field, enter the username and
c Click Apply.
5 In the Dial on Demand Dynamic Dial section of the
navigation frame, click the PPP AuthRemoteUser link.
a In the start field, choose 4.
Y
O
C
OUR
FFICE
password for Office A (your office) in quotes. For
example, enter:
"OfficeA" "passwordA"
NETB
ONNECT
UILDER
10 B
/R
RIDGE
OUTER
Advertisement
Table of Contents
