Making A Call From The Phonebook; Chain Dialing From The Phonebook; Switching To The Handset Speakerphone During A Call - Uniden DECT2035 Owner's Manual

Making a Call from the Phonebook

1. With the phone in standby, press
2. Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 26).
3. Press TALK/FLASH or
Note: You can also press TALK/FLASH or
dial, and then press MENU/SELECT.

Chain dialing from the phonebook

If you often have to enter a series of digits or a code number during a call, you can save that code number to a
phonebook entry. When your call connects, just use the phonebook to transmit the saved code number. (This is
referred to as chain dialing.)
1. Enter the code number (up to twenty digits) into the phonebook (see Creating Phonebook Entries on page 25).
Be sure to enter the code number into the phonebook exactly as you would enter it during a call.
2. During a call, when you hear the prompt that tells you to enter the code number, press
3. Use or to select the phonebook entry that contains the digits you want to send.
4. Press MENU/SELECT. The phone sends the digits of the code number exactly as you saved them in the
phonebook entry.

Switching to the Handset Speakerphone During a Call

To switch a normal call to the speakerphone, press
normal call, press .
DECT 2035+1 OM.indb 32 DECT 2035+1 OM.indb 32
to open the phonebook.
to dial the number.
before you open the phonebook. Find the phone number you want to
on the handset. To switch from a speakerphone call to a
32
.
15/7/08 12:00:19 PM 15/7/08 12:00:19 PM