Using The Answering System; Turning Your Answering System On And Off - Uniden DECT2035 Owner's Manual

Using the Answering System

Turning Your Answering System On and Off

1. With the phone in standby, press
ANSWER ON/OFF.
2. The system announces "Answering System
is on" and plays the current greeting.
Turning On
3. The message counter LED displays the
number of messages stored in memory.
If the counter fl ashes, then you have new
messages waiting.
1. With the phone in standby, press
ANSWER ON/OFF.
2. The phone announces "Answering System
Turning Off
is off."
3. The message counter LED is no longer
illuminated.
Notes: • If the answering system announces "No remaining time" when you turn it on, the memory is full (the
message counter LED also shows FL). The answering system can't record any new messages until you
delete some of the saved ones.
• If you do not set the clock, your messages may not have the correct day and time stamp. To set the clock,
see page 23.
DECT 2035+1 OM.indb 47 DECT 2035+1 OM.indb 47
From the base
47
From the handset
1. Press MENU/SELECT.
2. Select the Ans. Setup menu, and then the
Ans. On/Off submenu.
3. Move the cursor to select On.
4. Press MENU/SELECT. You will hear a
confi rmation tone.
1. Press MENU/SELECT.
2. Select the Ans. Setup menu, and then the
Ans. On/Off submenu.
3. Move the cursor to select Off.
4. Press MENU/SELECT. You will hear a
confi rmation tone.
15/7/08 12:00:34 PM 15/7/08 12:00:34 PM