Table of Contents
Advertisement
Charging the Battery
Installing the Handset Batteries
Press battery cover release.
Slide cover off.
Install the 3 rechargeable Ni-MH
batteries.
Slide the battery cover back
until it snaps into place
Place the handset on the base and
charge uninterrupted for 14 hours.
Only use the battery pack supplied or rechargeable AAA
Ni-MH Batteries.
DO NOT USE STANDARD BATTERIES.
iii
Using the Phone
To make a call
1. Press talk [
] and listen for the dial tone.
2. Dial phone number.
OR
1. Dial phone number
2. Press the talk [
To hang up
Press talk [
] or place the handset back on
the base unit.
To answer a call
Handset on the base unit: Remove handset from
the base and speak
Handset off the base unit: Pick up handset, press
the talk [
] key and speak
To store a number:
• in Standby Mode, enter the telephone
number you wish to store and press
•
will be displayed.
NAME?
• enter the name of the person with this
number in the same way that you entered the
letters of your user name (page 17).
• press
[OK]
key.
•
will be displayed.
ADDRESS:XX
• press
[OK]
key.
• the phone number is now stored in the memory.
To phone a stored number:
• press
key to enter the phone book.
[OK]
• press
to scroll through the names in
[menu]
your phone book.
• when you reach the one you wish to call, press
talk
and the number will be dialled
[
]
automatically.
] key.
.
[OK]
Advertisement
Table of Contents
