2: In A Cab-4 Series Backbox - Honeywell Notifier ACPS-610/E Manual

Mounting Options
The ACPS-610 can fit in either the
lower left or lower right of any CAB-4
Series cabinet.
CHS-6 Chassis
When the power supply cannot
be mounted in the CAB-4's
lowest row, use the CHS-6
chassis. The ACPS-610 will
require the left two of the three
chassis spaces.
The CHS-6 Chassis will fit in
any row of the CAB-4 Series
except for the bottom row. The
bottom is designed to hold
batteries and does not have the
studs for mounting.
ACPS-610/E Manual — P/N 53018:A1 07/31/2007
Lower left
installation:
Lower the power
supply over the
cabinet's
support brackets
and fasten to the
backbox with
two # 4-40 self-
threading
screws,
included,
(P/N 38114) at
the indicated
OR
positions.
Figure 2.2 CAB-4 Series Backbox
Fasten the power supply to the
chassis with two # 4-40 hex nuts,
included, (P/N 36045) at these
positions
Figure 2.3 Mounted in a CHS-6 chassis.
Installation
Lower right
installation:
Fasten the power
supply to the
backbox with two
# 6-32 self-
threading screws,
included,
(P/N 38120) at
the indicated
positions.
15