Jahc Introduction; How To Set Up Auto Power On Function - Giada AP23 User Manual

4. JAHC Introduction

JEHE Active Hardware Control (JAHC) management system includes both hardware Micro Control
Unit (MCU) and software (JAHC Technology Manager). It can support following functions:
1. Automatically boot up when power on. It is controlled by the Micro Control Unit (MCU) chip.
2. Real Timer Controller (RTC) wake up: user can install the JAHC software to set up automatic
startup and shutdown, one week as a circle.
3. Watchdog timer. It is a built-in API interface.
4. Infrared remote control (Optional IR controller).

4.1 How to set up Auto power on function

Automatically reboot when power on
The function of automatically reboot when power on is controlled by hardware. You can enable it by
switching the JAHC button to "on".
If you cannot find the physical switch on the player, then you can go into the BIOS to enable it by
following steps:
a. Turn on the player and continually press 'Del', then it can enter BIOS setup menu.
- 36 -