Microplex logiJET T4-2 Operator's Manual page 91

________________________________________________________________________________________________
To get access to the Service Functions you have to start the printer in the
Service Mode:
Start the printer in the Service Mode:
Turn the printer off
Turn the printer on
_______________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604
The Service Functions can be carried out by a MICROPLEX authorized
operator or a service engineer.
A not trained person is not allowed to carry out this operations.
Please be especially careful when carrying out the following operations to
avoid maladjustments and damaging the printer.
Panel display
+
[Service Mode ]
Operator's Manual logiJET T4-2 /T6-2 /RFID
Notes
Before starting the printer the
ENTER key and NEXT key have to be
pressed simultaneously.
Turn the printer on and keep the keys
ENTER and NEXT pressed until the
messages [Service Mode ] is displayed.
Now the functions of the service menu
are available (compare dashed areas
in the Menu Structure of section 8.2).
  
Panel Functions
Edition 2.2
Web: https://mpi.com.es/
91