Microplex logiJET T4-2 Operator's Manual page 6

6 Contents
_______________________________________________________________________________________________
Chapter
9.30. Selecting the Tear Off Mode (Option: Cutting Mode)
9.31. Selecting the Print Mode
9.32. Adjusting the Tear Off Position (Option: Cutting Position)
9.33. Configuration of Network Parameters (IP Address, e.g.)
10. Using the RFID Functions
10.1. Integrated RF Write/Read module
10.1.1. CE - Conformity
10.2. RFID Panel Functions
10.2.1. Selecting the RFID Mode
10.2.2. Selecting the Communication Protocol
10.2.3. Adjusting the Transponder Position (Tag Position)
10.2.4. Adjusting the Number of RFID Access (Timeout)
10.2.5. Adjusting the Transmission Speed (Bit Rate)
10.2.6. Reading the Label Identification Number automatically
10.3. Data Interface Status Out
10.4. IDOL Commands for RFID
10.4.1. Overview Function Group RFID
10.4.2. Reading the Label ID Number (Prior to the Print Process)
10.4.3. Writing Data into a Data Block of the RFID Label
10.4.4. Generating a Page ID Number, Receiving the RFID data after Printing
10.5. Syntax of RFID Data (Status Messages)
10.6. RFID Errors
11. Operator Maintenance
11.1. Printer Cleaning
11.1.1. Printer Cabinet Cleaning
11.1.2. Printhead Cleaning
11.1.3. Transport Roller Cleaning
11.2. Printhead Exchange
11.2.1. Printhead Removal and Installation
11.3. Adjusting the Right Pressure Value
_______________________________________________________________________________________________
MICROPLEX
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604
Operator's Manual logiJET T4-2 /T6-2 /RFID
Page
134
136
139
141
145
145
145
147
147
148
149
155
156
157
158
159
159
162
163
164
166
168
173
173
174
175
178
179
180
184
Edition 2.2
Web: https://mpi.com.es/