Listening To Am/Fm/Tv Channels; Directly Selecting A Channel - Uniden UBC340CRS Owner's Manual

Listening to AM/FM/TV Channels

To listen to AM/FM/TV channels, slide the
mode selector to AM/FM. Then, press the
button at the top of the scanner to select
the desired source (AM for AM Broadcast,
FM or FM for FM or TV Broadcast).

Directly Selecting a Channel

Press SVC/DIR to select the direct entry
mode. Use the s/t buttons to step through
the selected band. The scanner stops on
active channels. TV channels are scanned
after FM channels in FM mode.
You can also enter the channel frequency
using the keypad, enter the channel
frequency (for FM or AM) or the TV channel
number and press E/PGM .
Listening to AM/FM/TV Channels
8
UBC40CRS OM.indd 8 7/5/08 4:8:7 PM