Using The Alarm Clock; Setting The Current Time; Setting The Alarm Clock - Uniden UBC340CRS Owner's Manual

Your scanner's Clock displays whenever you turn off the radio functions.
It can also be used as a standard alarm clock.

Setting the Current Time

Follow the steps to set the current time:
. Move the slide switch to Clock Set.
er
The hour digits flash.
. Press s or t to change the hour by one
hour increments or press the number keys
to select the present hour. Then press
E/PGM to set the hour. The minutes digits
flash.
. Press s or t to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. The seconds reset to
00. Press E/PGM,
4. Press s or t to select AM or PM. To make your selection, move the
slide switch to Clock. The scanner exits the clock setting mode.

Setting the Alarm Clock

Follow these steps to set the alarm time:
. Move the slide switch to Alarm Set.
or
The hours digits flash.
. Press s or t to change the hour by one
hour increments or press the number keys
to select the present hour. Then press
E/PGM to set the hour. The minutes digits
flash.
. Press s or t to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press E/PGM to set the
minutes. The
4. Press s or t to move from AM to PM and back. Press E/PGM to
make your selection. To lock in the alarm time, move the slide switch
to Clock.
er
UBC40CRS OM.indd 6

Using the Alarm Clock

AM/PM
flashes.
AM/PM
display icon flashes.
Using the Alarm Clock
6
7/5/08 4:8:5 PM