Locking/Unlocking Channels
If the scanner has stopped on a channel press [L/O] once to temporarily lock it out
or quickly press [L/O] twice to permanently lock it out. Cycling power off/on
automatically unlocks temporarily locked-out channels.
To lockout a channel when the scanner has not stopped on the channel, or to
unlock a permanently locked-out channel.
1. Press [HOLD/RESUME] to hold on a channel.
F
2. Tap
to switch to the Function Mode , then rotate the control
system where the channel is stored.
F
3. Tap
or wait 2 seconds, then rotate the Scroll Control
channel you want to lock or unlock.
4. Press [L/O] to temporarily lock or unlock the current the channel. Double-tap
L/O to permanently lockout the current channel.
ID Scan/ID Search Mode
While you are scanning a trunked system, the scanner can be in either ID Scan or
ID Search mode:
• ID Scan — the scanner only stops on talk group ID's (TGID) that you have
programmed into the system that are unlocked.
• ID Search — the scanner stops on any unlocked talk group that becomes
active.
To toggle between ID Scan and ID Search, press
while the scanner is scanning the system.
If the scanner does not scan the system long enough for you to easily do this,
F
press
and rotate the Scroll Control to select the changed system. Then, press
[SCAN/SEARCH] within 2 seconds.
Holding On a System
To temporarily hold on a system, tap
rotate the control to select the system. Normal scanning resumes 2 seconds after
your last selection.
To permanently hold on a site or system, press and hold the Scroll Control for 2
f
seconds.
flashes in the display's upper left corner. The scanner continues to
F
then press [SCAN/SEARCH]
F
. To hold on a different system, tap
to select the
to select the
F
then
Operation
55