Selecting System Channel Groups; Locking/Unlocking Systems; Locking/Unlocking Channels - Uniden BC246T Owner's Manual

continue to hold
FUNC
unlock the system.

Selecting System Channel Groups

Within a system, you can assign groups of channels to a
group quick key (see "Setting the Group Quick Key" on
Page 72).
Follow these steps to activate or deactivate a channel
group within a system while scanning.
1. Press to hold on the system (or hold
Func
rotate the scroll control to select the system).
2. Continue to hold
corresponding to the channel group you want to
activate or deactivate.

Locking/Unlocking Systems

Follow these steps to lock out a system so that it does not
scan even if its quick key is selected.
1. While holding down
select the system.
2. Continue to hold down
out the system.
3. Repeat Steps 1 and 2 to unlock a system you have
previously locked.

Locking/Unlocking Channels

Follow these steps to lock out a channel so that it does
not scan even if its system and channel group are
selected.
1. While holding down
select the system where the channel is stored.
2. Release then press Hold within 2 seconds to
Func
hold on the system.
3. Rotate the scroll control to select the channel you
want to lock or unlock.
4. Press L/O to lock or unlock the channel.
and press L/O to either lock out or
and press the number key
Func
, rotate the scroll control to
Func
and press L/O to lock
Func
, rotate the scroll control to
Func
Basic Operation
43
and
Func