Locking/Unlocking Systems; Locking/Unlocking Channels; Id Scan/Id Search Mode - Uniden BC246T Owner's Manual

1. Press to hold on the system (or hold
Func
rotate the scroll control to select the system).
2. Continue to hold
Func
corresponding to the channel group you want to
activate or deactivate.

Locking/Unlocking Systems

Follow these steps to lock out a system so that it does not
scan even if its quick key is selected.
1. While holding down
select the system.
2. Continue to hold down
out the system.
3. Repeat Steps 1 and 2 to unlock a system you have
previously locked.

Locking/Unlocking Channels

Follow these steps to lock out a channel so that it does
not scan even if its system and channel group are
selected.
1. While holding down
select the system where the channel is stored.
2. Release then press Hold within 2 seconds to
Func
hold on the system.
3. Rotate the scroll control to select the channel you
want to lock or unlock.
4. Press L/O to lock or unlock the channel.
You can also lock out an active channel by pressing L/O
while the scanner is stopped on the channel.

ID Scan/ID Search Mode

While you are scanning a trunked system, the scanner
can be in either ID Scan or ID Search mode:
and press the number key
, rotate the scroll control to
Func
and press L/O to lock
Func
, rotate the scroll control to
Func
Basic Operation
42
and
Func