Direct Entry Search Hold Mode; Entry Search Into Channel Memory - Uniden BEARCAT BC95XLT User Manual

direction upward. Frequencies appear during the
search.
Notes:
• You can set the delay function on or off during
the search or while the search stops.
• You can skip a frequency when the search stops.
After the search skip frequency is set, the scan-
ner starts direct search again.

Direct Entry Search Hold Mode

To stop searching during direct entry search, press
HOLD
Hold.
+ changes the search direction downward and
pressing Func +
upward.
direction.
Press Func +
step or Func +
down or
increase or decrease the frequency.
To resume direct search, press Func + Src or Hold.
or appears on the display, showing the search
direction.
Storing Frequencies Found During Direct

Entry Search into Channel Memory

Follow these steps to store frequencies received
during direct entry search mode or direct entry
search hold mode.
1. Press Func + Pgm in direct entry search mode
or direct entry search hold mode. The frequency
and lowest blank channel alternate on the
display.
appears. In this mode, pressing Func
changes the search direction
or appears depending on the search
to decrease the frequency by one
to increase it by one step. Hold
for about 1 second to quickly
Special Features
45