1. Press Hold to stop the search.
2. Press Func +
frequency.
3. Press Func + L/O.
To clear all the skip frequencies at once while
searching or search hold, press Func then press
and hold L/O until the scanner beeps.
Notes:
•
If you selected all frequencies to be skipped
within the search range, the scanner beeps 3
times and does not search.
•
If you select more than 50 frequencies to skip,
each new frequency replaces a frequency
previously stored, beginning with the first stored
frequency.
•
Press Func +
skipped frequency while
appears when you select a skipped frequency.
Delay
Sometimes a user might pause before replying to a
transmission. To avoid missing a reply on a specific
channel, you can program a 2-second delay into any
channel or frequency. The scanner continues to
monitor the channel frequency for an additional
2 seconds after the transmission stops before
resuming scanning or searching. The scanner
automatically sets a delay when you store
frequencies into channels or when you search
frequencies. When the delay feature is on,
appears. If it is off, follow one of these steps to
program a delay depending on how the scanner is
operating,.
or Func +
L/O
appears.
L/O
or Func +
47
to select the
disappears.
to select a
HOLD
appears.
Special Features
L/O
DLY