UNIDEN UHF CB Transceiver
Controls/Indicators/Connections
CONNECTIONS
FRONT PANEL
23. MICROPHONE SOCKET
The microphone plug is inserted into this socket.
BACK PANEL
24. EXTERNAL SPEAKER JACK -
internal speaker is automatically disconnected. The connecting wire must use a 3.5mm miniature plug only.
25. ANTENNA CONNECTOR
26. DC POWER CORD
- DC Power is connected to the transceiver through this jack. A power cord is supplied with the
transceiver.
23
25
used for remote receiver monitoring. When the external speaker is connected, the
- Connect the Antenna here using a standard UHF (PL259) type connector.
5
24
26