Controls/Indicators/Connections; Controls - Uniden UH088sx Owner's Manual

UNIDEN UHF CB Transceiver

Controls/Indicators/Connections

uh088sx

CONTROLS

10
1. LIQUID CRYSTAL DISPLAY (LCD) PANEL - Indicators for TX, CAL, MEM, TSQ, GS (OS), SCN
PRI, Channel Number, Frequency, Signal Strength Level (S), Transmit Power Level (RF),CTCSS Code
and DUP .
2. UP/DOWN CHANNEL SELECTOR
communication channel.
3. ON/OFF, VOLUME & SQUELCH CONTROLS
ON/OFF & Volume Control (Centre Knob)
Turns the uh088sx power ON or OFF and adjusts the volume.
Squelch Control (Outer Ring)
Eliminates background noise in the absence of an incoming spiral.
4. PUSH-TO-TALK (PTT) - SWITCH -
5. TONE CALL CONTROL BUTTON
SELCALL option is installed.
6. DUPLEX Control
Press this button momentarily to choose semi-duplex opeartion for channels 1 through 8.
7. OPEN SCAN/GROUP SCAN CONTROL (OS/GS)-
GROUP SCAN Mode.
8. SCAN CONTROL (SCAN)
OS/GS Scanning.
19 1
9
8
-These controls are used to select the desired
Press to transmit and release to receive.
- Press to transmit SELCALL codes, it functions on condition that
Switches operation between OPEN SCAN and
- Press to activate Normal OS/GS
3
2
3
4
7 6
scanning or press and hold to enable Seek Mode
5