Uniden UH088sx Owner's Manual page 33

REPLY DELAY
While scanning, the uh064sx stops at a busy channel and receives a
transmission. When the received signal is over, the unit will wait for 2
seconds for the return of the signal, otherwise, the radio resumes scanning.
TO OPERATE IN DUPLEX MODE (REPEATERS)
The Duplex function enables you to access local repeater stations. You can
only activate Duplex from CH01-CH08.
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will
extend the range of your radio and overcome the shielding effect caused by
solid obstructions.
Contact your retailer for a list of repeaters available in
Your area.
Operation with the aid of a Repeater
1. Press select/ key six times.
2. Press or to change to .
o
3. Press select/ to confirm
To deactivate the duplex operation repeat activation process and change
. uh064sx will return to normal operation.
o
If or key is pressed when the channel is not from Ch01 -
Ch08, an error tone sounds.
P
appears on the display.
P
(8)
to