Indicators - Uniden UH088sx Owner's Manual

UNIDEN UHF CB Transceiver
Controls/Indicators/Connections
9. MEMORY CONTROL (MEM) -
10. TONE SQUELCH CONTROL (TSQ) -
SELCALL option is installed.
10 Secondary function: Continuous Tone Coded Squelch System (CTCSS)
group to talk to each other without hearing other users on the same channel.

INDICATORS

17
16
11. Channel Indicator - Indicates the channel number currently selected. On TX SELCALL usage the Channel
Indicator becomes a Memory location indicator.
12. Scan Indicator (SCN) - SCN icon appears when normal Scan mode is activated. When Seek mode Scanning is
selected the SCN icon blinks.
13. Priority Indicator (PRI)
regularly being checked for activity while GS scanning.
14. Continuous Tone Coded Squelch System (CTCSS) Code
current channel.
15. Frequency Indicator - Shows the frequency of the current selected channel.
16. RECEIVE SIGNAL/ RF LEVEL indicator (S/RF)
or the relative transmit power (RF) when transmitting.
17. DUPLEX Indicator (DUP)
18. TRANSMIT indicator (TX)
transmitting. The RF icon also appears at this time.
19. TONE SQUELCH indicator (TSQ) - The TSQ icon will appear when the selected channel is set to operate in
Quiet Mode, or flashes when the radio is called using SELCALL.
20. CALL Indicator (CAL) - The CAL icon appears when the uh088sx radio is called using SELCALL. It also
appears when SELCALL codes are being transmitted.
21. MEMORY Indicator (MEM)
OS Memory.
22. GROUP SCAN Indicator (GS)
indicated by the absence of the GS icon.
Places channel numbers into the memory scan list (OS or GS).
Controls Tone Squelched operation (quiet Mode) on condition that
21 22
20
19
18
15
14 13
- Indicates that priority channel is active when continuously lit or flashes when it is
- Indicates the relative signal strength level when receiving (S)
- The DUP icon appears when duplex operation is selected.
- TX appears when the PTT button on the microphone is pressed and the radio is
- MEM appears when the displayed channel is programmed either in GS or
- The GS icon appears when Group Scan Mode is activated. Open scan is
4
- is a feature that allows a
12
11 12
- Indicates the CTCSS code selected for the