Table of Contents
Advertisement
For model number
verification, visit
our website www.
uniden.com.au or
www.uniden.co.nz
[ 42 ]
Call Transfer Feature
1) During a call, press
2) Select a handset to transfer the call within 10
seconds. (Refer to step 2 in the intercom section
on page 41).
The call will automatically be placed on hold, and
an intercom tone sounds.
To cancel the transfer, press
handset.
3) On the receiving handset, to answer the page, press
transfer/int'com. If you turn AutoTalk on, pick up the handset from the cradle.
If Anykey Answer is On, press any number key,
intercom mode is activated, but the caller is still on hold.
4) To transfer the call, press
on the receiving handset.
rEplaCing ThE baSE
If the base unit is replaced with a different base from this same series of cordless
models, you must clear handset (s) and base identification numbers. To do this,
select "System Reset" from handsets display menu option list (see page 17 for
guidance).
/transfer/int'com.
or
speaker on the initiating
on the initiating handset, and press
Hold,to transfer
Handset
#2
Handset
#3
or
/
, or
. The
tone
Hide quick links:
Advertisement
Table of Contents
